meshing

英 [ˈmeʃɪŋ]

美 [ˈmeʃɪŋ]

v.  (使)吻合，相配，匹配，适合; 啮合
mesh的现在分词

COCA.41043

柯林斯词典

• N-VAR 网眼织物;网状物
  Meshis material like a net made from wire, thread, or plastic.
  1. The ground-floor windows are obscured by wire mesh.
     一楼的窗户装有防盗网。
  2. ...a mesh small enough to exclude tiny insects.
     网眼小得足以挡住小昆虫的网
• V-RECIP-ERG (使)相匹配;(使)相互协调;(使)吻合
  If two things or ideasmeshorare meshed, they go together well or fit together closely.
  1. Their senses of humor meshed perfectly...
     他们的幽默感配合得天衣无缝。
  2. This of course meshes with the economic philosophy of those on the right...
     这自然与右派的经济哲学相吻合。
  3. Meshing the research and marketing operations will be Mr. Furlaud's job.
     把研究与市场运作紧密结合起来将成为弗劳德先生的工作任务。

英英释义

noun

• the act of interlocking or meshing
  1. an interlocking of arms by the police held the crowd in check
  Synonym:meshinterlockinterlocking
• an open fabric of string or rope or wire woven together at regular intervals
  Synonym:netnetworkmeshmeshwork
• contact by fitting together
  1. the engagement of the clutch
  2. the meshing of gears
  Synonym:engagementmeshinterlocking

双语例句

• The Optimization Design of Meshing Parameters for a Involute Harmonic Gear
  渐开线谐波齿轮啮合参数的优化设计
• Based on the above principle, the model for the friction power loss of the gears meshing was built.
  据此原理，建立了齿轮啮合过程的摩擦功耗计算模型。
• How do you see what you do meshing with, in particular, LeBron?
  你怎么看待你和你的队友之间磨合，尤其是勒布朗？
• Meshing Characteristic and Stress Analysis of Skew Bevel Gear with Parameterization Method
  参数化斜齿圆锥齿轮的啮合特性与应力分析研究
• The difference between the plunge shaving and the conventional shaving is pointed out from the meshing points of view.
  分析并阐述了径向剃齿法与普通剃齿法在啮合原理上的区别；
• Gears using two gear teeth meshing with each other to transmit power and motion of the mechanical transmission, with the main, driven wheel gear direct, transmit motion and power of the device.
  齿轮传动装置利用两齿轮的轮齿相互啮合传递动力和运动的机械传动，用主、从动轮轮齿直接、传递运动和动力的装置。
• After building the equations of tooth surfaces and the meshing model of a spherical gear pair, tooth contact analysis of spherical gear pairs is performed through simulation.
  在建立了球齿轮齿廓曲面方程和啮合模型基础上，利用计算机仿真的方法对其进行了齿面接触分析研究。
• Study on the Meshing Principle of Three-freedom Straight and Inclined Gear;
  三自由度直、斜齿齿轮啮合机理的研究一齿轮与另一齿轮啮合。
• It evaluated the maximum and minimum errors of tooth end shape meshing phases.
  评定了齿端廓形啮合相位的最大、最小误差。
• The structure and principle of reciprocating positioning chain are introduced, and the meshing process is analyzed also.
  摘要介绍循环定位链传动的结构及工作原理，并分析啮合过程。