silencers

英 [ˈsaɪlənsəz]

美 [ˈsaɪlənsərz]

n.  (发动机的)消音器; (枪支的)消音器
silencer的复数

柯林斯词典

• N-COUNT (枪支的)消音器
  Asilenceris a device that is fitted onto a gun to make it very quiet when it is fired.
  1. ...a pistol that was equipped with a silencer.
     装了消音器的手枪
• (汽车排气管上的)消音器
  Asilenceris a device on a car exhaust that makes it quieter.

in AM, use 美国英语用 muffler

双语例句

• Numerical analysis of the effect of structural parameters on the acoustic attenuation performance of straight-through perforated tube silencers
  结构参数对直通穿孔管消声器消声性能影响的数值分析
• The boundary element method is then used to investigate the effects of bulk density of sound-absorbing material ( or flow-resistivity) and geometrical parameters on acoustic attenuation performance of perforated tube dissipative silencers.
  边界元法进而被用于研究吸声材料的填充密度（流阻率）和几何参数对穿孔管阻性消声器消声性能的影响。
• Research on Experimental Measurement Technique for Acoustic Performance of Ducts and Silencers
  管道和消声器声学性能的试验测量技术研究
• The sound source and microphones are arranged reasonably, so that the transmission loss of silencers with high gas flow velocity and the flow generated noise inside the silencer can be measured on the test-bed.
  设计并搭建了消声器声学性能测量试验台，合理布置声源及传声器，使该台架可用于高流速情况下消声器传递损失以及消声器内流噪声的测量。
• Three-dimensional FEM is developed to predict and analyze the acoustic attenuation characteristics of perforated tube silencers.
  三维有限元法被发展用于预测和分析穿孔管消声器的声学性能。
• Finally, the transmission loss results of straight-through perforated tube silencers with partially-perforated tube and divided tube are calculated and analyzed. Some conclusions are drawn according to these results, which supply guidance for silencer designs.
  最后计算并分析了中心管部分穿孔和带有分隔管的直通穿孔管消声器的传递损失，得出一些结论，为消声器设计提供指导。
• The perforated elements are commonly used in silencers to improve the acoustic attenuation and flow characteristics. To predict the acoustic attenuation performance of silencers, the acoustic characteristics of perforated elements needs to be determined first.
  由于能改善消声效果和气体流动特性，穿孔元件在消声器中广泛应用，为预测消声器的声学性能，首先需要确定穿孔元件的声学特性。
• Comparisons of transmission loss predictions with experimental results for straight through perforated tube dissipative silencer illustrated that FEM can predict acoustic characteristics of perforated tube silencers accurately.
  直通穿孔管阻性消声器传递损失的有限元预测结果与实验测量结果吻合很好，表明了三维有限元法预测穿孔管阻性消声器声学性能的适用性和精度。
• The 3-D numerical methods are used to predict the acoustic attenuation performance and flow resistance characteristics of internal combustion engine exhaust silencers.
  使用三维数值计算方法预测内燃机排气消声器的声学性能和阻力特性。
• The paper gives a method about the integrative drive of the CAD software for tractor exhaust silencers and a method for DOS change.
  介绍了拖拉机排气消声器CAD软件的一体化驱动方法和“状态切换”方法。